Main features Three leg base with cylinder ring, rotating on ball bearings and centralized by flanges in oil bath. Three protection gates automatically stop the knitting machine if opened. Motor with Inverter control system to achieve the adequate speed, for speed variations from slow speed to fastest.

Pulsing key for the very slow starting speed (needle-by-needle), instead of hand controls.
Lighting lamps on the knitting head.
Mechanical tensioner with constant feed tension, with self adjusting springs, according to the type of fabric manufactured.
Feeders mounted on two rings, or on three, if the use of feeders for elastomers is forecasted.
Knitting head with 2.4 feeds per diameter inch.
Sinker cams with closed track, along the entire profile of the machine.
Feeders pre-programmed for knitting with elastomeric yarns.

Lubrication of needles and sinkers by a high pressure electromagnetic pump.
The knitting head and the parts in contact with the yearn carried are cleaned by compressed air and fans systems.
Needle-by-needle selection by mechanical and ceramic actuators (one for each feeder with 16 levels), electronically controlled by the on-board computer, to copy the needle selection (3-way technique). CPU, display with touch keyboard, 3.5 drive disk, electronic control cards for the actuators, boards for interface with machine users.
Expandable capacity of 2 MB operational memory, simulated display of several stops and diagnostic for possible failures.