Main features Three leg base with cylinder ring, rotating on ball bearings and centralized by flanges in oil bath. Three protection gates automatically stop the machine if opened.

- Motor with Inverter control system to achieve the adequate speed, for speed variations from slow speed to fastest.
- Pulsing key for a very slow starting speed (needle-by-needle), instead of hand controls. Lighting lamps on the knitting head.
- Mechanical tensioner with constant feed tension, adjustable by variating jockey pulleys according to the type of fabric manufactured.
- Feeders mounted on two rings, or on three, if the use of feeders for elastomers is forecasted.
- Knitting head with 2.4 feeds per diameter inch.
- One housing for each feeder fitted on the dial, with selection cams in 2 tracks. The boxes are easily interchangeable, to facilitate the change for knitting different structures.

Yarn guides with individual movement, mounted on a single ring to facilitate the setting and adjustment.
Micrometric adjustment of fabric structure settings available.
Lubrication of dial and cylinder needles by a high pressure electromagnetic pump. The knitting head and the parts in contact with the yearn carried are cleaned by compressed air and fans systems.
Needle-by-needle selection by mechanical and ceramic actuators (one for each feeder with 16 levels), electronically controlled by the on-board computer, to copy the needle selection (3-way technique).
CPU, display with touch keyboard, 3.5 drive disk, electronic control cards for the actuators, boards for interface with machine users.
Expandable capacity of 2 MB operational memory, simulated display of several stops and diagnostic for possible failures.